You have gearing needs ...
we have design and manufacturing solutions !
HyGEARS V 5.0 is the ideal tool for your design, analysis and manufacturing of a large range of gear types. Since its introduction in 1994, HyGEARS has consistently helped gear manufacturers around the world. From the largest to the smallest, HyGEARS V 5.0 delivers the solution.
New in V 5.0, the upgraded graphics subsystem offers state of the art viewing and model manipulation. And HyGEARS being a 64 bit application means you never have to wait.
HyGEARS V 5.0 is an advanced 3D gear engineering software for the design, analysis, optimization and manufacturing of a wide
range of gear types.
- Spiral-bevel, hypoid and Zerol gears, using Face Mill and Cyclo-Palloid cutting processes;
- Straight-bevel gears
- either 2Tool generator or Coniflex™ ;
- Curvic and Hirth couplings; Spiral Face Clutches;
- Beveloid gears, external and internal;
and helical gears, external and internal - in planetary or offset arrangements;
- Double-helical / Herringbone gears;
- Involute splines;
- and more.
HyGEARS V 5.0 produces:
- Blank dimension sheets for all gear types and machine settings for all supported spiral-bevel
STEP / DXF files to export tooth model and sections to CAD/CAM software packages;
3, 4, 5 Axis CnC machine ready part
programs to cut all supported gear types on any CnC machine, using a large array of tools;
measurement target files for most popular
CMMs; HyGEARS uses CMM data to evaluate the quality of a gear, Closed Loop or Reverse Engineer unknown gear sets.
Standard: Calculation of load capacity of bevel gears. This option was made in collaboration with ZG-Hypoid GmbH (see https://www.zg-hypoid.de)
Involute Simulation Softwares Inc.
1139 des Laurentides
Quebec, QC, Canada G1S-3C2
Copyright (C) 2021 Involute Simulation Softwares Inc. All Rights Reserved
HyGEARS THE GEAR PROCESSOR ™
Updated November 2021
1,650 mm diameter ...
12 mm diameter ...
46 mm diameter ...